Personalized Brachytherapy for a Herlyn-Werner-Wunderlich Syndrome Patient with Endometrial Cancer: A Case Report.

A middle-aged woman with irregular vaginal bleeding was admitted to another hospital. Routine blood test results, liver function, kidney function, and electrolyte levels were within normal ranges. The patient’s serum cancer antigen (CA) 125 (CA125) level was elevated to 182.0 IU/mL (0–35.0 IU/mL), and CA199 and carcinoembryonic antigen levels were within the normal range. Pelvic magnetic resonance imaging (MRI) revealed that the uterus was poorly formed and showed bi-cavitary changes. The left uterine volume was significantly increased, the myometrial signal was significantly heterogeneous, multiple nodules were observed, and some protruded from the uterine contour; the largest size was 7.4×7.3 cm. Sagittal T2-weighted imaging of the right uterus showed a normal structure and signal intensity in the three layers of the uterus. Chest and abdominal computed tomography (CT) revealed no tumor metastasis. Subsequently, hysteroscopic bilateral endometrial biopsy was performed. Pathology, in combination with immunohistochemistry, revealed that the left uterus was an adenocarcinoma, which is considered a high-grade serous carcinoma. Total laparoscopic hysterectomy, bilateral salpingo-oophorectomy, pelvic lymph node dissection, para-aortic lymph node dissection, omentectomy, abdominopelvic adhesiolysis, and peritoneal brush cytology were performed. Postoperative histology revealed that the left uterus and ovary had mixed high-grade adenocarcinomas, including some serous carcinomas and some endometrial carcinomas, with a focal invasion of the myometrium. Multiple uterine myomas with adenomyosis were also observed in the left uterus. Tumor invasion of uterine blood vessels was also observed. Adenomyosis with some epithelial dysplasia was observed in the right uterus, but no carcinoma was observed in the parametrium. One of the 16 lymph nodes in the left pelvic cavity was positive, while 10 lymph nodes in the right pelvic cavity and six para-aortic lymph nodes showed no lymph node metastasis. No malignant tumor cells were found on peritoneal cytology. Using the International Federation of Gynecology and Obstetrics (FIGO) Staging System, version 2018, the tumor was classified as Stage IIIC1. Using the American Joint Committee on Cancer TNM Staging System version 8, the tumor was classified as T3aN1M0 (Stage IIIC1). Immunohistochemical examination of the tumor revealed positivity for Vimentin, P53, P16, ER, and CD34 were positive. However, the napsin A, WT-1, and HNF-1B tests were negative. The Ki-67 proliferation index was ~70%. A definitive diagnosis of EC was confirmed based on the histopathological and immunohistochemical results. Genetic testing revealed a TP53 exon7 mutation with an abundance of 41.14%. Molecular typing was classified as having a high copy number. The patient received three cycles of chemotherapy with paclitaxel and carboplatin. The patient was admitted to our hospital for adjuvant radiotherapy. External beam radiotherapy (EBRT) and intracavitary brachytherapy (ICBT) were performed. For EBRT, the clinical target volume (CTV) included the lower half of the vaginal, parapodium, and pelvic lymphatic drainage areas. The planning target volume was defined as a 6‒10 mm margin added to the CTV in all directions. The prescribed dose was 50.4 Gy to at least 95% of the planning clinical target volume in 28 fractions. High-dose-rate ICBT generally begins after intensity-modulated radiation therapy with 192 Ir. For ICBT, to show the shape of the vagina, two inflated balloons with sterile physiological salt solution filled the double vagina for MRI ( Figure 1A and B ). As shown in Figure 1C and D , MRI was used to create a 3D-printed ICBT applicator. Figure 1 ( A and B ) Images of two inflated balloons with a sterile physiological salt solution. ( C and D ) T2-weighted magnetic resonance images were obtained after two inflated balloons with sterile physiological salt solution filled the double vagina. ( A and B ) Images of two inflated balloons with a sterile physiological salt solution. ( C and D ) T2-weighted magnetic resonance images were obtained after two inflated balloons with sterile physiological salt solution filled the double vagina. A 3D-printed applicator was designed and sent to a 3D printer (Eden260VS; Stratasys, Inc, Gilbert, AZ, USA). Examples are shown in Figure 2A . Applicators are available for clinical use after quality assurance. As shown in Figure 2B , catheters with copper sulfate were placed in two 3D-printed applicators to show the needle paths in the applicators. As shown in Figure 2C and D , a planning MRI scan was performed. CTV included the lower half of the vaginal wall. The dose calculations were performed using the Oncentra Brachy Treatment Planning System (Elekta, Stockholm, Sweden). A prescribed dose of 10 Gy was delivered in two fractions. The CTV and organs at risk (OARs) doses were converted to an equivalent dose of 2 Gy (EQD2). The final goal was a cumulative dose to the CTV of 65.89 Gy in the 3D-printed plan. The cumulative doses of the D2cc of the bladder, rectum, and sigmoid were 4858, 4362, and 5293 cGy, respectively. A multichannel cylinder (MCC) simulation plan is developed. As shown in Table 1 , the dosimetric indices were superior in the 3D-printed plan than in the MCC plan. In Figure 3A and B , when evaluating the CTV from the vaginal apex, the isodose curve of 100% cover was better than that in the MCC plan. Figure 3C and D show a 100% isodose curve covering a larger volume range of the urethra and rectum, respectively. Comparing the two groups of plans, these results favor the 3D-printed plan. The patient’s follow-up time was 6 months, with an Eastern Cooperative Oncology Group score of 0 and no reported acute urinary or lower digestive tract events. Table 1 Dosimetric Comparison of Organs at Risk Between Multichannel Cylinder (MCC) and Three-Dimensional (3D)-Printed Plan Dosimetric Parameters MCC Applicator 3D-Printed Applicator D98 (cGy) 417.76 435.55 D90 (cGy) 586.87 586.12 Bladder D2cc (cGy) 480.29 221.83 Rectum D2cc (cGy) 513.04 396.17 Sigmoid D2cc (cGy) 98.46 180.00 Small intestine D2cc (cGy) 89.93 80.18 Urethra D0.1cc (cGy) 730.38 424.49 Figure 2 ( A ) Photographs of the three-dimensional (3D)-printed applicators. ( B ) Catheters with copper sulfate were placed in two 3D-printed applicators. ( C and D ) T2-weighted magnetic resonance images were obtained after the catheters with copper sulfate were placed in two 3D-printed applicators. The catheters with copper sulfate are represented by blue arrows. Figure 3 ( A and B ) Vaginal apex treatment plans using a multichannel cylinder (MCC) and 3D printer. ( C and D ) Midvaginal treatment plans using MCC and 3D-printer. Dosimetric Comparison of Organs at Risk Between Multichannel Cylinder (MCC) and Three-Dimensional (3D)-Printed Plan ( A ) Photographs of the three-dimensional (3D)-printed applicators. ( B ) Catheters with copper sulfate were placed in two 3D-printed applicators. ( C and D ) T2-weighted magnetic resonance images were obtained after the catheters with copper sulfate were placed in two 3D-printed applicators. The catheters with copper sulfate are represented by blue arrows. ( A and B ) Vaginal apex treatment plans using a multichannel cylinder (MCC) and 3D printer. ( C and D ) Midvaginal treatment plans using MCC and 3D-printer.

Endometrial carcinoma (EC) is the seventh most common cancer in women, with a high mortality rate. 1 Vaginal cuff brachytherapy (VBT) has become the standard adjuvant treatment for EC, with a high risk of recurrence after resection. 2 Vaginal applicators are tools for performing VBT and are the most commonly used single-channel cylinders (SCC). 3 However, SCC sometimes delivers inadequate dose coverage to the vaginal apex, owing to source anisotropy. 4 Creating individualized applicators for different patients using three-dimensional (3D) printing technology achieves satisfactory dose distribution. 5 , 6 Herlyn-Werner-Wunderlich syndrome (HWWS) is a rare disease often discovered at menarche and consists of anomalies of the female reproductive tract. It comprises the three most common forms of anomalies, including uterus didelphys, unilateral blind hemivagina, and ipsilateral renal agenesis. 7 This case report describes a patient with HWWS who was admitted to our hospital with postoperative EC and provides insights into a personalized treatment approach that has resulted in satisfactory clinical outcomes.

To our knowledge, this is the first reported case of EC with HWWS that was treated with VBT. Moreover, this is the first study on VBT using 3D-printed applicators in patients with HWWS. In this case, copper sulfate was used as a photographic developer for the 3D-printed applicator reconstruction in MRI. Abnormal development of the Müllerian and Wolffian ducts caused HWWS. It is a rare genital malformation, with a true incidence of approximately 0.1–3.8%. 8 The development of EC associated with HWWS is not yet clear. Research has shown that women with endometriosis and adenomyosis have an increased risk of developing EC. 9 In our case, postoperative pathology revealed adenomyosis in both uteri, suggesting that EC may be associated with HWWS. According to European Society for Medical Oncology (ESMO) (Version 2022) guidelines, for the FIGO stage IIIC patients with EC who had regional lymph node involvement, the treatment methods included radical surgery with postoperative adjuvant treatment. 1 Adjuvant chemotherapy with or without postoperative radiotherapy is the treatment of choice for these patients. Pelvic EBRT with VBT and EBRT alone is a common radiotherapy treatments. 1 The vaginal vault is a common relapse site for patients with EC undergoing radical surgery. 10 Given the pattern of EC failure, VBT alone is regarded as the standard adjuvant therapy for high-intermediate-risk endometrial cancer. 10 However, the role and utilization of a VBT boost in EBRT are less clear in patients with stage III EC. 11 Bingham et al evaluated 12,988 patients with stage III EC using the National Cancer Database. 12 They found that EBRT plus VBT had a significantly improved 5-year survival rate compared to EBRT alone (69% vs 66%, respectively; P < 0.01) for patients with cervical stromal involvement. Rossi et al analyzed 611 women with stage IIIC EC. 13 They found that EBRT plus VBT had a significantly improved 5-year survival rate compared to EBRT alone (63% vs 47%, respectively; P < 0.001) for patients with direct local disease extension. For patients with stage III EC, the ESMO guidelines (Version 2022) list the optional inclusion of a VBT boost. 1 Uterine serous carcinoma is an aggressive histological subtype of endometrial cancer, with a high relapse rate. 14 Hong et al evaluated 5432 women with uterine serous carcinoma and found that VBT was associated with a significant survival advantage. 15 In this case, the patient was staged IIIC1 with uterine serous carcinoma, and a boost in VBT to EBRT was administered. In this case, different treatments were considered. Interstitial brachytherapy is often used in specific situations, including large tumors, asymmetric tumors, organs at risk proximity, and patient anatomy considerations. 16 Owing to irregular dose distribution and special anatomy, interstitial brachytherapy may increase the risk of side effects such as bleeding, urethritis, and cystitis. In the case of postoperative endometrial cancer, the most commonly used brachytherapy is the intracavitary techniques. 17 The patient was diagnosed with complete vaginal septum and required removal of the entire vagina if surgical excision was necessary. It results in significant surgical trauma and affects the quality of life. In this case, a patient who received VBT for personalized applicators may be a suitable choice. MCC applicators have become more popular for VBT treatment because of their dose flexibility. 4 However, the vagina may not be cylindrical because of surgery and anatomic irregularities. 5 Furthermore, MCC applicators are limited to various applications owing to air gaps. Air spaces cause a 1–2 mm displacement of the vaginal wall, which can reduce the dose to the vaginal mucosa by more than 10%. 18 Personalized vaginal applicators are one choice to overcome the limitations of MCC applicators. 19 Yan et al showed that 3D-printed applicators obtained significant improvements in CTV-1 cm V100 (by 13%) and D90 (by 11%) compared to MCC; 3D-printed applicators demonstrated superiority over MCC in terms of OARs protection. 5 The advantages of 3D-printing technology include versatility, cost-effectiveness, and accuracy. 20 In this case, the doses to the bladder, rectum, urethra, and small intestine in the 3D-printed plan were lower than those in the MCC plan were. Meanwhile, the apex of the vagina was better covered by the CTV in the 3D-printed plan. With the development of imaging technology, brachytherapy based on imaging modalities has increased the precision and accuracy of treatment. 21 MRI can provide better soft tissue contrast than CT and is already used for some gynecologic cancers. 22 The vaginal cuff can be visualized using MRI, which provides better images for defining the gross disease. 22 The introduction of brachytherapy by MRI has led to a new era of increasingly effective treatments. 23 One challenge of which is the reconstruction of the source pathways on MRI. Applicator reconstruction inaccuracies lead to dosimetric uncertainties in target volumes and OARs. 24 Schindel et al evaluated seven MRI marker agents and found that the CuSO 4 marker was feasible for MRI-guided gynecological brachytherapy. 25 In this case, custom-made plastic catheters with CuSO 4 solution were inserted into the source channels of MRI-compatible applicators. This method can provide accurate source pathway reconstruction. In cases in which conventional treatments are complex; a personalized approach is essential for the patient to have the broadest range of medically reasonable options. Currently, there is a report on EC with HWWS treated with VBT using 3D-printed applicators. Reconstruction of titanium applicators using MRI is complex. CuSO 4 has been used as an MRI marker in brachytherapy, achieving relatively good dose distribution and no relevant acute toxicity reaction. This unique, personalized treatment approach has provided satisfactory outcomes for patients. Patients treated with personalized brachytherapy are expected to achieve long-term survival.