Technical and economic indicators for operating irrigation pump using natural gas

preprint OA: closed
View at publisher
AI-generated summary by claude@2026-07, 2026-07-14

This study experimentally analyzed technical indicators for natural gas-air mixers operating an irrigation pump, finding the L10 mixer provided 10% less power than gasoline.

One-sentence paraphrase of the abstract; not a substitute for reading it. No clinical advice. How this works

Abstract

This paper presents the experimental for the types of mixers used in mixing natural gas with air to operate the irrigation pump to save energy, many of measurements were carried 2021 year in workshops of Agricultural Engineering Department, Faculty of Agriculture, Ain Shams University, Egypt. Used engine single-cylinder, air-cooled. A new pump with a discharge diameter of 2 inches, which was an Egyptian manufacture. Several types of mixers were manufactured to mix natural gas with air before entering the engine. Using iron pipes of different diameters, three types of mixers were used Mixer with a perforated inner tube of 8, 10. 12cm (L8, L10, L12) . selected determine the four shaft speeds (1750, 2300, 2900 and 3500 rpm) using the engine speed measuring device. The results here dealt with study the analysis of technical indicators for the types of mixers used in mixing natural gas with air to operate the irrigation pump. where the actual power (Braking power) is superior to all types when operating with gasoline was (3.07 kW) A comparison with the use of natural gas, where the mixer type (L10) (2.69 kW) was 10% less than gasoline.

My notes (saved in your browser only)

Citation neighborhood (no data yet)

We don't have any in-corpus citations linked to this paper yet. The paper's references may be in our DB but unresolved to ``paper_id`` (resolution happens at ingest when the cited DOI matches a row we already have). Run the cross-source citation reconcile pass to retry.

Source provenance

europepmc
last seen: 2026-05-19T01:45:01.086888+00:00