Investigation of Surface Quality in Cost of Goods Manufactured (COGM) method of µ-Al2O3 Powder-Mixed-EDM Process on Machining of Ti-6Al-4V

Abstract It is very essential to form such high stregth and hard-to-cut materials by using modern machining methods. It is important to introduce the efforts on modification of the process for improving the machining quality. In the present investigation, an effort was made to analyze the effects of micro size aluminium particles mixed dielectric medium under different powder concentration on machining titanium alloy in electro erosion process. The response-surface-methodology(RSM) based algorithm was utilized to analyze the performance measures by considering machinning time with Cost of Goods Manufactured (COGM) method in PMEDM process. It was found that the micron size powders can significantly help to enhance the surface quality of the Ti-6Al-4V surface during machining in EDM process. The presence of carbon, oxygen elements and the formation of surface oxides and carbides has been found due to the decomposition of dielectric fluid in PMEDM process. The lower deep cavities and uniform machining surface have been produced with the aluminum oxide powder EDM process owing to lower surface cracks density, conductivity. To sum up, investigation and comparison of surface scanning showed that this setting has been implied could be considered by the industries needs more precision.