The starting mechanism study on rainfall-induced sloop loose source in strong earthquake area

Regarding risks from debris flows, previously unrecognized low-frequency loose slope source materials starting in formation areas constitute an especially significant threat. The 5.12 Wenchuan earthquake in 2008 led to a large number of loose deposits on the slope on both sides of the gully in the formation area. Under the triggering action of heavy rainfall, the gully easily failed and started earlier than the overall start of the gully debris flow, which has practical significance for realizing the early warning of the gully debris flow starting. The special loose source conditions and postearthquake geological environment change the hydraulic mechanism of traditional debris flow start-up, which brings great difficulties to the monitoring and early warning of postearthquake debris flows. Therefore, based on hydraulics, on the premise of building a hydraulic model of groundwater level change of loose slope accumulation body, the characteristics and rules of groundwater level change are analyzed with the aid of hydraulic seepage theories, and the action characteristics of hydrodynamic pressure and hydrostatic pressure on the accumulation body are quantitatively studied. Based on field exploration data and average slope gradient, we divided the accumulation body in a reasonable manner; completed the sliding force, anti-sliding force and residual-sliding force mechanical expression and establishment; and performed a slope stability analysis. The research results show that the slope-starting mode is divided into the thrust-type landslide and the retrogressive landslide mode of the subsection disintegration. The hydraulic deposit mechanism analytical results can also reverse the critical rainfall condition of slope failure. Finally, taking the Yindongzi gully in Dujiangyan as an example, the hydraulic mechanism of typical slope deposits in the formation area was analyzed and combined with the historical debris flow events in the study area to verify the physical simulation test, which was consistent with the field investigation results after the disaster.