Building a large affordable Optical-NIR telescope (I): An alternate way to handle segmented primary mirror

The use of innovative ideas and the latest technology have undoubtedly brought down telescope costs substantially. However, there are still ways to further reduce the cost of optical ground-based telescopes and make them affordable to much larger and wide spread astronomical communities. In this and subsequent papers we are presenting our studies carried out towards building affordable mid-size telescopes of 4.0-6.0m in size. In the present era, segmented mirror technology has become the first choice for building moderate to large-size telescopes. In any Segmented Mirror Telescope (SMT) the most important part is its primary mirror control system (M1CS). The conventional M1CS is based on edge sensors and actuators, but such a system introduces many design and implementation complexities. In this paper, we propose to make use of an Off-axis Alignment and Phasing System (OAPS), which is an active mirror kind of control system working in real time to maintain the figure of a segmented primary mirror without the use of edge-sensors. The alignment and phasing system which is an integral part of any segmented telescope can be used in the real time at the off-axis. Through extensive simulations we have explored the feasibility of using an OAPS for co-alignment, co-focusing as well as co-phasing of segmented mirror telescopes. From our simulations we find that the co-alignment and co-focusing of the segments can be achieved with a guide star as faint as 16-18th magnitude. This implies that seeing limited performance for any segmented telescope can be easily accomplished without use of a complex edge sensor based control system. Whereas, to attain diffraction limited performance, mirror segments need to be co-phased with an accuracy of few tens of nanometers. In our simulations we have used a dispersed fringe sensor based phasing scheme, which can effectively work up to guide stars of 14th magnitude.