The Fire Resistance Performance of Concrete Columns With Different Compressive Strength

Four full concrete columns have been created Tested below high temperature for The fire resistance of concrete elements in concrete with particular compressive strengths. The standard concrete with compressive strength values of C25 were made of one of the four specimens, while the rest were made of C35, C60 and C75 respectively, respectively. During simulation of Within the laboratory furnace, the same For the specimens, axial forces were applied. Many experimental outcomes parameters were evaluated in contrast, including temperature changes, Vertical moving, side deflection, fire resistance and Failed properties of the specimen. The results have shown a rise in the compressive strength of the concrete for the concrete columns from the outside up to the inside of the column the same cross section of the lower compressive forces of concrete display better fire resistance efficiency with the same initial axial strength ratio. The C35, C60 and C75 columns' fire resistance is higher than standard concrete columns. The initial and secant rigidity of the columns of Reinforced concrete (RC) has also The percentage decreased dramatically after fire exposure and the temperature increased from 25 to 750 ° C.