Intro
Embryo transfer (ET) is the last stage, and one of the most critical steps in
Assisted Reproduction Technology (ART) cycles ( Sallam, 2005 ). Among the most important variables that
determine the success or failure of the procedure are: ultrasound guidance
( Brown et al. ,
2016 ), uterine contractions during ET ( Pierzyński & Zbucka-Kretowska,
2014 ), and the catheter type used during the procedure ( Buckett, 2006 ). A few years ago, the
type of catheter chosen was recognized as one of the main variables interfering
positively or negatively on the ET effectiveness. Kovacs (1999) and Salha et al. (2001) classify the selection of the catheter,
respectively, and third and fourth most important variables for the positive outcome
of the cycle.
Considering the importance of the catheter chosen, some studies have been carried out
to compare the efficacy of those commercially available. The results of these
studies showed that the soft catheters had better performance when compared to rigid
or semi-rigid ones ( Abou-Setta et
al. , 2005 ; Ruhlmann et al. , 2015 ), because they
prevented trauma to the endocervix or the endometrium, and were pliable to be freely
driven into the uterine cavity ( Omidi et
al. , 2015 ). When soft catheters were compared, the
most used, and therefore the most studied, were the following: Edwards-Wallace
( McIlveen et al. ,
2005 ; Saldeen et
al. , 2008 ; Rhodes et al. , 2007 ), Cook K-Jet ( McIlveen et al. ,
2005 ), Frydman Ultrasoft ( Ruhlmann
et al. , 2015 ) and Cook Sydney ( Saldeen et al. ,
2008 ).
The preferred catheter varies according to each professional's experience in embryo
transfer. In our fertility clinic, two types of soft catheters are the most used:
the Tight Difficult Transfer Set (Set TDT ® ) 4.5 and the
Cook ® Sydney IVF catheters. We have used these catheters in
most ET procedures and found that there were no studies comparing their
effectiveness; thus, we decided to run a prospective study to compare two groups of
patients undergoing embryo transfers using the TDT 4.5 and the
Cook ® Sydney catheters.
Results
The study groups were matched by age and the following variables: AFC, FSH, AMH,
number of follicles with diameter ≥ 17 mm, retrieved oocytes, oocytes in
metaphase II, oocytes in 2 PN, generated embryos, mean score of embryos and number
of embryos transferred were not statistically significant. Ten out of thirty-four
patients in the TDT group had a positive outcome for pregnancy, corresponding to
29.4%. The Cook Sydney group had 9 patients out of 34 with positive outcomes,
corresponding to 26.5%. Comparing the efficacy of both catheters for the primary
outcome, there was no significant difference ( p >0.05) between
the TDT and the Cook Sydney catheters. The initial dose of gonadotropin reflects the
ovarian reserve, and it was the only variable that showed statistical significance
( p =0.040), although all patients were subjected to the same
treatment regimen. The final dosage was not significant ( p >0.05)
in both groups. The primary outcome showed no difference between the groups. The
statistical analysis results are depicted on Table
I .
Discussion
The superiority of flexible catheters over rigid and semi-rigid ones is well
established in the literature. Abou-Setta
et al. (2005) in their review, concluded
that flexible catheters have better pregnancy rates when compared to rigid
catheters, and Ruhlmann et al.
(2015) demonstrated that the implantation rate is increased
when using flexible catheters rather than semi-rigid ones.
Several studies compared soft catheters. When the Cook Soft and the Edwards-Wallace
catheters were compared, there was no statistically significant difference between
them regarding pregnancy rates ( Boone et
al. , 2001 ). Another study comparing those two
flexible catheters was carried out by McIlveen
et al. (2005) , with a larger sample (75
patients per group) and they also found no significant difference in pregnancy rates
between the groups. Rhodes et
al. in 2007 , comparing the same two types of
catheters, showed that pregnancy rates with the Cook's was 5% higher than with the
Wallace's: 63.3% vs. 58.0%, respectively; but the study power was not high enough to
demonstrate statistically significant difference. van Weering et al. (2002) studied
pregnancy rates comparing the TDT embryo transfer set and the Cook K-soft 5000 soft
trans universal embryo transfer set, and found that pregnancy rates were
significantly higher in the second group.
According to a literature review we carried out, the studies that compared the Cook
and the Wallace soft catheters showed no statistical difference in efficacy between
them (Boone et al. , 2001; McIlveen et al. , 2005 ; Rhodes et al. , 2007 ;
Saldeen et al. ,
2008 ). Just one study reported on the TDT Set (Buckett, 2006)
and we did not find studies that compared the two types of catheters we
compared.
Our study compared two types of soft embryo transfer catheters, with pregnancy rates
of 29.4% and 26.5%, for the TDT Set and the Cook Sydney, respectively. We found no
significant difference between the groups ( p >0.05). The groups
were matched by age, they used the same ovarian stimulation protocol and underwent
the same laboratory procedures. Although there was a statistically different initial
dose of gonadotropin between the groups, it did not impact our primary outcome
(pregnancy rate): subsequent laboratory data related to ovulation induction was
similar for both groups. Thus, we had a homogeneous sample in hormonal and
laboratory terms, which allowed us to assess whether there was a correlation between
the catheter used for embryo transfer and the β-hCG outcome. We believe that
the main weaknesses of this study were the sample size and the fact that it was not
a randomized clinical trial (RCT).
Conclusions
In conclusion, this prospective study supported that the modern ET soft catheters TDT
and Cook Sydney Set had a similar performance in ART procedures. Catheter choice may
be based on other factors, rather than its performance on outcomes. Future RCT
studies concerning catheter types and their efficacy under ultrasound guided
transfer are warranted.
Materials|Methods
Sixty-eight women undergoing in vitro fertilization (IVF) cycles
in our private fertility clinic (INSEMINE) in Porto Alegre, Brazil, were
recruited for this prospective study. The recruitment period occurred between
January 2014 and April 2016. The following criteria were considered for patient
inclusion: regular ovulatory menstrual cycles every 25-35 days; both ovaries
present; no clinical signs of hyperandrogenism; no current or past disease
affecting ovaries or gonadotropin production and release, or sex steroid
secretion, clearance or excretion; no current hormone therapy. Exclusion
criteria involved: infertility caused by severe male factor and interrupted ART
cycles. The age of the patients varied from 30 to 39 years. The most common
cause of infertility among the patients was the male factor (38.2%, n = 26),
followed by endometriosis (37.9%, n = 19), tubal factor (19.1%, n = 13) and
other causes (14.8%, n = 10).
The patients were divided into two groups according to the catheter that would be
used for their ET: Set TDT (group 1) and Cook Sydney IVT (group 2). The choice
of catheter was made based on the operator's personal experience. Each group had
a total of 34 patients.
This study was analyzed and approved by our institutional review board. All the
patients signed consent forms and were made aware that their data could be used
in trials that intended to improve AR.
The primary outcome was defined as a positive β-human chorionic
gonadotrophin (β-hCG) blood test. All the patients were submitted to this
test 12 days after the ET. We considered as positive all the tests that had
shown results above 25 mIU/mL. We also collected the following data: age, cause
of infertility, antral follicular count (AFC), follicle-stimulating hormone
(FSH), anti-Müllerian hormone (AMH), gonadotropin initial dose, number of
follicles with diameter ≥ 17mm, retrieved oocytes, oocytes at metaphase
II, fertilized oocytes in 2 PN, embryos generated, embryo score and number of
embryos transferred ( Table I ).
Comparison between two catheters for embryo transfer in relation to
patient data and IVF cycle outcomes
The results are presented as mean ± standard deviation. AFC:
Antral Follicular Count, FSH: Follicle Stimulating Hormone, AMH:
anti-Mullerian Hormone.
Each woman was submitted to blood sampling procedure by venipuncture on cycle day
3. The antagonist protocol was used for ovulation induction. We determined serum
FSH levels using an automated multi-analysis system with chemiluminescence
detection. Serum AMH levels were measured by an ultrasensitive enzyme-linked
immunosorbent assay (ELISA). Laboratory data was obtained after oocyte puncture
and embryo evaluation was performed according to Fisch et al. (2001) criteria.
Set TDT ® (Laboratoire CCD, France) is an extra thin soft
transfer catheter. It has an outer sheath with a flexible extremity and 2
hysterometry guide-marks at 5.5 cm and 6.5 cm from the distal end. It also has a
malleable metal stylet coated in polyethylene and an extra-thin transfer
catheter on a stainless steel micro tube of 0.5 mm in diameter in its proximal
section.
The Cook ® Sydney IVF (Cook Medical, USA) has an outer firm
portion and an inner ultra soft portion. The outer catheter is 19 cm long and
has a polycarbonate hub, a bulb tip and an angled distal end. The inner portion
is 23 cm long and the tip is 2.8 French size.
Embryo transfers were performed by a team of professionals formed by three
gynecologists, all with over 5 years of experience. The difficult embryo
transfers were excluded because they could influence the assisted reproduction
cycle results.
We used the Statistical Package for Social Sciences (SPSS Inc., Chicago, IL, USA)
Statistics 20.0 software for statistical analysis purposes. The statistical
analysis for categorical variables was made using the Pearson Chi-Squared test.
Continuous variables were analyzed by the Student's t test. The value considered
as statistically significant was p ≤.05.
Text is read by the "Ask this paper" AI Q&A widget below.
Extraction quality varies by source — PMC NXML preserves structure
cleanly, OA-HTML may include some navigation residue, and OA-PDF can
have broken hyphenation. The publisher copy
(via DOI)
is the canonical version.