Direct and Easily Prepared Nanocomposite Impurity-Free Hydroxyapatite from Locally Delivered CKD as a Potent Catalyst for trans-2-Butene Production

This project is considered the first successful attempt to directly prepare highly pure nanocomposite hydroxyapatite (HAPT) from cement kiln dust. It is prepared by applying a cost-effective preparation method. This is confirmed by XRD, FT-IR and EDX analyses. The crystallite size of impurity-free hydroxyapatite sample prepared at 500°C was equal to 23.6 nm and showed a hierarchical mesoporous unit, in the nano-scale, with Ca-deficient structure according to SEM-EDX analyses. HAPT exhibits a high population of different acidic sites, i.e. weak, moderate and strong acidic sites, as determined by TG and DSC-TPD experiments using tetrahydrofuran (THF) as a probe molecule. This wide range of acidic sites over HAPT is clearly and positively enhanced its catalytic activity during the conversion of sec-butanol to trans-2-butene. The sec-butanol was converted by 40% into trans-2-butene at 200°C, and gradually increased up to 91.4% conversion at 300°C with % selectivity < 99%. Moreover, our prepared HAPT showed a higher catalytic activity using air as a carrier, during the conversion of sec-butanol, instead of N 2 -gas as a carrier. A comparison between the catalytic activity of HAPT prepared from the waste CKD and another sample prepared using pure Ca(NO 3 ) 2 , both calcined at 500°C for 3 h in oxygen, was done during the conversion of sec-butanol in the temperature range of 200-300°C. HAPT from CKD gave unrivaled results compared to the other sample prepared from calcium nitrate. We ascribed this distinguish behavior to both the acidic sites distribution over each sample and their crystallite sizes.