Modeling the irrigation requirements for an experimental site in Northern Alberta, Canada

A combined methodology of the Root Zone Water Quality Model (RZWQM), the generation of stochastic rainfall realizations, and an historical meteorological record were used to determine the supplementary irrigation requirement for an experimental site located in northern Alberta. The site receives an annual rainfall of approximately 500 mm yr -1 , and contains a fluctuating water table. The simulated results showed maximum irrigation requirements of 270 mm, however, half that amount can be required during an average or wet growing season of mean rainfall of 350 and 500 mm, respectively. The irrigation requirements were influenced by rainfall amount and distribution, downward flux and the subsequent fluctuation of the water table and the depth of water table at the beginning of the growing season, which was influenced by the winter season precipitation. The simulated results suggested that a water table less than 2 m deep from the ground surface can significantly reduce the irrigation requirements. Therefore, the winter precipitation and initial depth of the water table are suitable indicators of the likely requirement of irrigation during the growing season.