Analytical modeling of side grinding of orthogonal laminated SiCf/SiC composites based on effective elastic properties

SiC f /SiC composites have been applied in numerous fields because of their outstanding properties like high specific strength and high specific modulus. However, defects can be produced during grinding because the composites are hard and brittle. Moreover, the fabrication process of laminated SiC f /SiC composites is complicated and unstable, resulting in large differences in their elastic properties. Therefore, the effective elastic properties of composites needs to be obtained through theoretical analysis. In this study, the anisotropy of orthogonal laminated SiC f /SiC composites and the fracture removal mechanism of the brittle material were both considered to develop a more accurate model. The effective elastic constants of the laminated composites were calculated using a macromechanical analysis. The grinding process was divided into the ductile, ductile-to-brittle transition, and brittle stages for analysis by the critical cutting depth. The modeling development was based on the interaction between the diamond grains and workpiece. Substituting the effective elastic constants into the model, the predicted value is consistent well with the experimental value. The cutting force value presents a non-linear decreasing trend with increasing spindle speed but increases linearly with increasing feed rate and cutting width. The spindle speed and cutting width have more influence on the cutting force than the feed rate. Increasing the spindle speed and decreasing the feed rate and cutting width can reduce the cutting force. The model can be applied to adequately evaluate the effective elastic properties of laminated SiC f /SiC composites and effectively improve the grinding processes and machining efficiency in future applications.