A variety of Surface Techniques, Several Denture Base Repair Properties Were Investigated
preprint
OA: closed
Abstract
Abstract Heat-cure acrylic resin is used, and six sets of specimens were cut in guiding mode with a conventional positioning clamp. To evaluate impact strength, silicon sheets with diameters of (50×5×4) mm were created. On an alternative bending fatigue machine, specimens with a diameter of (70× 10 ×2.5) mm were evaluated. The monomer solvent's impact bond strength was found to be higher than that of the thinner solvent and the acetone solvent. Thiner solvents and monomer solvents have a lower fatigue bond strength than acetone.
My notes (saved in your browser only)
Citation neighborhood (no data yet)
We don't have any in-corpus citations linked to this paper yet. The paper's references may be in our DB but unresolved to ``paper_id`` (resolution happens at ingest when the cited DOI matches a row we already have). Run the cross-source citation reconcile pass to retry.
Source provenance
- europepmc
- last seen: 2026-05-19T01:45:01.086888+00:00