Assessing the potential of solubility trapping in unconfined aquifers for subsurface carbon storage

Carbon capture and storage projects need to be greatly accelerated to attenuate the rate and degree of global warming. Due to the large volume of carbon that will need to be stored to address this issue, it is likely that the bulk of this storage will be in the subsurface via geologic storage. To be effective, subsurface carbon storage needs to limit the potential for CO 2 leakage from the reservoir to a minimum. Water-dissolved CO 2 injection can aid in this goal. Water-dissolved CO 2 tends to be denser than CO 2 -free water, and its injection leads immediate solubility storage in the subsurface. To assess the feasibility and limits of water-dissolved CO 2 injection coupled to subsurface solubility, a suite of geochemical modeling calculations based on the TOUGHREACT computer code were performed. The modelled system used in the calculations assumed the injection of 100,000 metric tons of water-dissolved CO 2 annually for 100 years into a hydrostatically pressured unreactive porous rock, located at 800 to 2000 m below the surface without the presence of a caprock. This system is representative of an unconfined sedimentary aquifer. Most selected scenarios suggest that the injection of CO 2 charged water leads to the secure storage of injected CO 2 so long as the water to CO 2 ratio is no less than ~24 to 1. The identified exception is when the salinity of the original formation water substantially exceeds the salinity of the CO 2 -charged injection water. The results of this study indicate that unconfined aquifers, a generally overlooked potential carbon storage host, could provide for the subsurface storage of substantial quantities of CO 2 .