A review of non-destructive testing methods of composite materials

During their operation, modern aircraft engine components are subjected to increasingly demanding operating conditions, especially the high pressure turbine (HPT) blades. Such conditions cause these parts to undergo different types of time-dependent degradation, one of which is creep. A model using the finite element method (FEM) was developed, in order to be able to predict the creep behaviour of HPT blades. Flight data records (FDR) for a specific aircraft, provided by a commercial aviation company, were used to obtain thermal and mechanical data for three different flight cycles. In order to create the 3D model needed for the FEM analysis, a HPT blade scrap was scanned, and its chemical composition and material properties were obtained. The data that was gathered was fed into the FEM model and different simulations were run, first with a simplified 3D rectangular block shape, in order to better establish the model, and then with the real 3D mesh obtained from the blade scrap. The overall expected behaviour in terms of displacement was observed, in particular at the trailing edge of the blade. Therefore such a model can be useful in the goal of predicting turbine blade life, given a set of FDR data. Abstract A review provided about non-destructive testing (NDT) methods for the evaluation of composites. The review considers the capabilities of most common methods in composite NDT applications such as Visual Testing (VT or VI), Ultrasonic Testing (UT), Thermography, Radiographic Testing (RT), Electromagnetic Testing (ET), Acoustic Emission (AE), and Shearography Testing with respect to advantages and disadvantages of these methods. Then, methods categorized based on their intrinsic characteristics and their applications.