Achievement of Polarity Reversion From Al(Ga)-Polar to N-Polar For AlGaN Film on AlN Seeding Layer Grown By a Novel Flow-Modulation Technology

Abstract N-polar AlGaN epi-layer was realized on AlN seeding layer grown with a novel flow-modulation method. The polarity reversion from Al(Ga)-polar to N-polar for AlGaN/AlN films was confirmed by KOH etching and subsequent observation with optical microscope as well as high-resolution X-ray diffraction (HR-XRD) measurement. In particular, the dependence of crystalline quality and defect size in the N-polar AlGaN epi-layers on the Ⅴ/Ⅲ ratio was investigated with HR-XRD and scanning electron microscopy (SEM). It was found that as the full width at half maximum (FWHM) value of the X-ray rocking curve (XRC) varied with the Ⅴ/Ⅲ ratio in a "W-shape" for the N–polar AlGaN epi-layers, and a FWHM value as small as 450 arcsec was achieved for the sample grown with a V/III ratio of 988. Moreover, it was revealed by the SEM measurement that the maximum diagonal length of hexagonal cone on the surface of the N-polar AlGaN epi-layers decreased sharply when a Ⅴ/Ⅲ ratio of 1,236 was used although the crystalline quality and the surface morphology of the N-polar AlGaN epi-layers were not improved simultaneously. The peculiar migration of the group-III atoms on the surface of the N-polar AlGaN epi-layer associated with the molar ratio of TMA/(TMA+TMG) was considered to be responsible for this result.